Digiqual Systems
Digiqual Systems
Madipakkam, Chennai, Tamil Nadu
SEND SMS
SEND EMAIL

Chambers

We are a leading Manufacturer of environmental chamber, hot and cold chamber, humidity chamber and hot cold chamber from Chennai, India.

Environmental Chamber

Environmental Chamber
  • Environmental Chamber
Ask For Price

Heavy-duty robust construction with inner chamber made of stainless steel and outer made of cold rolled mild steel sheets finished in powder coating. The inter space in between the walls is tightly packed with superior grade glass wool.

The inner chamber accommodates stainless steel shelves at adjustable heights. Double walled, insulated door, and is provided in the front with Glass Window, which allows inspection of samples without disturbing the inner chamber temperature.

The rear chamber of the interior is fitted with a refrigeration evaporator, heater and powerful air circulating fan to create a positive air flow through the chamber. A hermatically sealed compressor below the chamber is provides temperature below ambient. The same compartment houses a boiler with an immersion heater and low water level switch for humidity.

The control panel comprises of ON/OFF switches, fully automatic PID controller for temperature and humidity. Indicators are provided for water level, main switch, heating, cooling and humidity Temperature range from 10 °C to 80 °C ±1 °C. and the humidity range is from ambient to 95% /- 3% RH. Provided with door operated exterior illumination by fluorescent tubes and 0-24 cyclic timer.

Designed to work on 220/230 volts A/C supply. Supplied complete with control panel.

Inner Chamber Size

No.of Trays

450 x 410 x 710 mm

2

605 x 605 x 910 mm

3

500 x 750 x 1000 mm

3

1000 x 1000 x 1000 mm

3

 

Request
Callback
Yes! I am interested

Hot and Cold Chamber

Hot and Cold Chamber
  • Hot and Cold Chamber
Ask For Price

Heavy duty robust construction with inner chamber made of stainless steel and outer made of S.S / cold rolled mild steel sheets finished in powder coating. The inner chamber accommodates stainless steel shelf at adjustable height. Double walled door, is provided with Glass Window which allows inspection of samples without disturbing the inner chamber temperature.

The inner space between the inner and outer wall is tightly packed with special grade glass wool or polyurethane foam (PUF) packed in blocks for effective insulation. 

Cooling is achieved by a hermetically sealed compressor with cascaded two-stage refrigeration system. Heating is done by Air heaters for dry heating with heat distributed evenly on the three sides.

The uniformity of the temperature is maintained by an air circulation arrangement.

The control panel with Microprocessor based Digital PID Temperature Controller, Pilot lamp, Air break magnetic contactor, MCB, Mains Switch, Other control switch etc; is provided. Power Supply: 220/230 volts A/C supply.

 

 

Chamber size

Temperature Range

350 x 350 x 350

- 20 °C to 100 °C

450 x 450 x 450

- 30 °C to 120 °C

 

500 x 500 x 500

- 30 °C to 120 °C

 

Request
Callback
Yes! I am interested

Humidity Chamber

Humidity Chamber
  • Humidity Chamber
Ask For Price
Double walled construction, interior made of thick gauge stainless steel sheets and exterior made of cold rolled mild steel sheets finished in powder coat. Inter space in between the walls is packed with special grade glass wool. The door is double walled having toughened glass window and seals against atmospheric infiltration by rubber gasket. The Inner chamber accommodates stainless steel trays at adjustable height. Humidity is controlled by Humidistat, having range 0% to 100% but humidity can be obtained from atmospheric humidity to 95% with sensitivity of ± 3%. Temperature controlled by digital temperature controller from ambient 5 ºCto 60 °C with an accuracy of ± 1 °C. Humidity is attained by the mist of water that is circulated inside the chamber for maintaining 40% to 95% humidity. A water reservoir will be provided with Auto low-level water cut off device and alarm. A compact control panel with switches, Indicating lamps, Temperature controllers are fixed at the side of the chamber for operational convenience.     Inner Chamber size 455 x 455 x 710 mm 605 x 605 x 605 mm 605 x 605 x 910 mm     Option:   Digital Controller with RTD Sensor: ± 2 ° C. Digital PID Controller for accuracy: ± 1 ° C Air Circulating Fan Assembly Timer
Request
Callback
Yes! I am interested

Hot Cold Chamber

Hot Cold Chamber
  • Hot Cold Chamber
Ask For Price
Other Details: Option: • Timer Specifications: Chamber Size No. of Trays 350 X 350 X 350 -20C to 100C 450 X 450 X 450 -30C to 120C 500 X 500 X 500 -30C to 120C
Request
Callback
Yes! I am interested
X
Looking for “Chambers”?


Reach Us
Kothandaraman R. (Managing Director)
No. 144/1, Ramakrishna Avenue, Easwaran Koil Street Madipakkam
Chennai- 600091, Tamil Nadu, India


Call Us

Send E-mail

Send SMS